|

How to insert animation in another Animation in photoshop ? Almost as well as on a simple picture. Only in this case should pay attention to the number of layers of pictures with animation and for the time of frames. So, of the two pictures with the finished animation, create one.

Let's open two pictures with animation, and let's see how much each layers have and what time is located on each frame.

1-file open.

In the layers window in this picture 4 layers,

And in the Animation window, time on frames 0.15.

Now open the second picture, which we will insert into the first. This is a picture of a butterfly without a background.

Here too 4 layers

And time on frames is the same.

So transfer the animation will be very simple.

2 Click on the picture with a butterfly and, in the layer window, allocate all the layers. (Press on the Ctrl keyboard and, while holding, click on each layer in the layer window or by clicking on Shift, click on the upper layer).

3-Select on the "Move" toolbar And drag the butterfly to the first picture.

The butterfly was vital, you need to reduce it.

4-editing-free transformation.

Reduce butterfly up to 80%

Press the "Apply" parameter panel.

5-in layers window Move the selected layers upstay, if there is so in the layer window.

Click the left mouse button on the layers and, without releasing it, move the layers up.

Then click on any layer so that active was only one layer.

6-in the animation window allocate the first frame by clicking on it,

In the window layers of the eyes should only be on the lower layer and on the layer 5.

7- In the animation window, allocate the second frame,

In the window layers of the peephole itself throws out on the second layer, and on the layer 6 you need to turn on the eyes and turn off on the layer 5.

8- In the animation window, allocate the third frame,

In the layer window, turn the eyes on the layer 7 and turn off on the layer 6.

7- In the animation window, highlight the fourth frame,

And in the layer window, turn on the eye on the upper layer and turn off on the layer 7.

9- Click on the Start in the Animation window and watch what happened.

10- File Save for Web and devices in GIF format.

How to transfer an animation to a simple picture See here. The following lessons will be on how to remove the background on animation and how to insert Animation in the animation in Photoshop With a different amount of layers and different times on frames.

Method 1: Easy Gif Animator

First of all, we propose to familiarize yourself with the profile software, which was specifically created to work on GIF-animations. Its functionality allows you to add an unlimited number of frames to an already prepared project, which makes it possible to insert one gif to another as a continuation.

Download Easy Gif Animator

1. The Easy Gif Animator program applies for a fee, but developers provide a trial version for a month for a month without any restrictions, which means that you can upload it from the official site to test by clicking on the corresponding button when you first start.



2. In the start menu, click on the item. "Open existing" To add first animation.



3. In the window that appears "Explorer" Lay the desired file and click on it twice for opening.



4. Wait for the full boot of the workspace in which go to the tab "Frames" .



5. There you are interested in the tool "Paste a frame" .



6. Display again "Conductor" where you find the second gif to insert and end it in the same way.



7. When notifications appear about adding new frames, mark the marker option "Add all shots" .



8. Through the list of frames, make sure that the gluing has passed successfully.



9. If necessary, use auxiliary tools if you need to make adjustments to the project before conservation.



10. As soon as the work on the gif is completed, in the same tab "Frames" Click on the button "Export selected" .



11. Specify a new name for the GIF file and specify the place on the computer where you want to save it.



12. Return to K. "Conductor" And reproduce a new animation by any convenient method to make sure to create it.

Among the opportunities available in Easy Gif Animator there is a huge number of various tools that will be useful when manually creating or editing the finished Gif animation, even if it does not need to be connected to another file.

Method 2: Adobe Photoshop

It is known that Adobe PhotoShop graphic editor supports the creation of a GIF from the added frame. It also includes tools designed to edit such animations that can be used when connecting multiple files to one, which is as follows:

Download Adobe Photoshop

1. Run Adobe Photoshop, expand the drop-down menu "File" and select "Open" . It can be called through a standard keyboard shortcut. Ctrl + O. .



2. A discoveries window will appear where to find the first gif and double-click on it to add.



3. While still editing it is impossible to start, because there is no time scale. Add it through the drop-down menu "Window" , noting the corresponding item.



4. Make sure that each frame of the added gif is displayed correctly, and then proceed to the next step.



5. Use the same menu again. "Open" To add a second file to merge.



6. In it, open the time scale menu and activate the item. "Allocate all shots" .



7. Return to it and select another feature called "Copy frames" .



8. Each file in Adobe Photoshop is displayed as a separate tab, so move to the first GIF by clicking on its tab on top.



9. In the same time scale menu, click "Insert footage" .



10. A new action menu will appear, where to mark the appropriate insertion marker and confirm the addition.



11. Browse each frame and make sure that the insert has passed successfully.



12. Expand Menu "File" and select "Save as…" .



13. In the window "Preservation" Change the name for the new GIF file, set the appropriate file type for it and confirm the action.

If you are interested in creating a GIF through the considered program from scratch, we advise you to familiarize yourself with thematic material on our website, going to the following link. There you will find a detailed analysis of the two methods of working on similar projects.

Read more: Creating GIF in Adobe Photoshop

Method 3: Filmora

As a third method, consider a full-fledged video editor called Filmora. It is not intended to frame-edit existing GIF, however, supports the opening of this format and exports in it, and therefore several animations can be connected to one by performing a simple algorithm of actions.

Download Filmora

1. After starting Filmora, click on the inscription "Import media files here" To go to add animations to the project.



2. In the window that appears "Explorer" You can immediately select the required number of files, and then click on "Open" .



3. Drag the first gif to any free path of the editor, closing it with the left mouse button.



4. Do the same with the second, placing it after the first.



5. Make sure the animation is normal and check its playback.



6. As soon as editing is completed, click on the button "Export" To save the project.



7. On the panel "Format" Choose "GIF" .



8. Set export parameters, including permission, frame rate, file name and location of it.



9. Press "Export" To start the save process.

We are glad that you could help you solve the problem. Describe what you did not work.

Our specialists will try to answer as quickly as possible.

Will this article help you?

WELL NO

Share Articles on Social Networks:

In Photoshop, this is done elementary.

- Enable the scale / animation window.

- load one gif-ku (background), then another (basic)

- Allocate the very first layer in the background gif (so that new layers are inserted above)

- You allocate all layers and all frames on the main hyphae and, holding the SHIFT key (i.e., withstanding the center), drag the basic gif-ku on the background.

Then it remains only to install in the animation scale which layers are included in which frames. Here the main difficulty may occur if the number of frames in the main and background gif do not coincide. Solved in different ways. For example, duplicate frames of one gif-ki (short) inside the other frames. Either removing the "extra" layers of long gif. In general, this is a creative process)))

Here is an example of such a combined gif-ki out of three - Gif-ka fish is imposed on gif-ku, and there is a hyphae of my faces from above)))

It is clear here that the gif-ka of the sea consists of only 10 layers + 8 inversion (1st and last layer do not repeat), i.e., only 18 layers. Here they are in this sequence and are repeated throughout the entire Gif-ki from 200 approximately frames.

By Julia

Next - the words of the author

When you make a collage or a postcard in Photoshop, sometimes I don't want to make animation yourself. It's easier to find the finished brilliance or animation, such pictures are saved in GIF format, we save the usual static picture in IPEG format, IPG. And now I will tell you how you can combine these two formats. Those who have long been engaged in photoshop perfectly know how to do it. My lesson for beginners.

So, lesson -

How to apply a GIF image on a simple picture in Photoshop.

We open a picture in Photoshop to which the Gif would like to move. I took a picture with flowers. We do not forget to remove the lock in the layers, click 2 times with the left mouse button on the lock and in the window that opens, click OK.

I found a butterfly in GIF format, I open a picture in Photoshop.

We see that the butterfly pictures have a lot of layers, so as not to destroy the animation, we will not be able to drag the butterfly, standing on one of the layers. So we need to drag all the layers immediately. We get up onto the first layer, it should be active with us, press the SHIFT key on the keyboard and click the left mouse button along the top layer. What do we see?

We have all the layers of blue, i.e. Active. Tool Move We drag the butterfly to the picture with flowers. Click the left mouse button on the first layer of the butterfly and now we have an active only 1 layer of animation.

And now we need to move the butterfly. To do this, open the Animation window. Glazik in the picture and on 1 layer are open. We have an active layer of animation, on all other layers, the eyebound is turned off. I approximate the time in the animation, I have 0.2 sec.

And then we do this: 1 layer in animation and eyebound is open to 1 layer in the layers panel. Add a layer in the animation by clicking on the leaf below, we have 2 layers of animation - close the eyebound to 1 layer in the layers and open the eyebound to 2 layers, add a layer in the animation - close the eyebound to 2 layer and open it on the 3rd and exactly We continue on all layers, add a layer in the animation, in the layers on the previous layer, close the eyebound, open on the new one. I think the principle is understandable.

All made, run animation and see if everything is fine, save for Web. I got like this

Our lesson - how to put a GIF image on a simple picture in Photoshop finished. You now know how to move pictures in GIF format on images in IPEG format, IPG. If there are some difficulties, ask.

And thanks for looking to me!

http://makarovayuliya.ru/kak-nalozhit-gif-izobrazh...-prostuyu-kartinku-v-fotoshope

Canva is an online constructor for creating a photo and video for sites and social networks. The project site has a detailed manual for creating animation. To save an animated GIF, you need:

1. Create or open the project and click on the "Download" button.

2. Select GIF format and press the button again.

3. The designer will start generating video in GIF.

4. Gif animation will be saved automatically. If this did not happen, you need to click on the link "Click here":

Pros:

• Simple, intuitive interface.
• The ability to create animations from the photo and video.
• More than 4 million photos and other elements in the library.
• More than 1,000 fonts, plus you can upload your own.
• Creating an animation is in the free version.
• Free access to complete functionality - 30 days.
• No need to install the program to the computer.

Minuses:

• To work with the service you need to connect to the Internet.

SUPA is an online constructor with which you can create video from images or multiple video and save them in GIF format. For this you need:

1. Create or open a video project and click on the "Download" button.

2. Select the format "Animation GIF", specify the quality and number of frames per second. Press the "Generate" button.

3. The designer will start converting video to GIF.

4. In the window that opens, click on the "Download to Computer" button. Gif animation will soon appear in your folder.

Pros:

• Simple, intuitive interface.
• The ability to create animations from the photo and video.
• Millions of free photos and video in the library.
• A large number of templates for animation.
• No need to install the program to the computer.

Minuses:

• Gif-format is saved only in the paid version.
• Relatively high cost - from 990 rubles per month for the premium version of the product.
• To work with the service you need to connect to the Internet.

GiPhy - the base of gif animations in which you can find a suitable gif or create your own photo or video.

For the latter you need to do the following:

1. Select a photo or video from which the gif will be created. As an example, Gif animation is formed from the photo. Gif from the video is created similarly.

2. In the window that opens, select the desired file and click on the Open button.

3. Add, if you need, inscriptions and stickers or apply filters in the right menu.

4. Add new photos if you are still needed, you can use the button Addword

5. Go to the next step by clicking on the button Continue to Upload .

6. Specify if you need, tags and link to images if they are taken from the Internet. Click on Upload to Giphy. To create a gif animation.

7. Press the button Media To save the gif in the service.

8. Select a string Source. and click on the button Download To download the gif to the computer.

Pros:

• Ability to create GIF from the photo and video.
• Simple, intuitive interface.
• No need to install the program to the computer.

Minuses:

• You can accommodate only one inscription.
• There is no way to trim the image or video for the desired size.
• Duration GIF - 15 seconds maximum.
• You can work with the service only if the Internet is connected.

EZGIF is an online service that edits gif animations and creates new photos or video.

What is needed for this:

1. Select a photo or video from which you will create a gif. As an example, gif animation is created from the video. Gifka from the photo is created similarly.

2. You need to specify the path to the file on the computer using the "Select File" button or insert a link if the desired video is on the Internet, for example on YouTube. Then click on the button Upload Video. .

3. After clicking on the button on the screen, nothing will happen. You do not need to panic - the file is loaded: -) After a few minutes (or seconds, if the file is small) a window with a downloaded video and the editor in which you can compress it or trim, impose text or add a watermark.

4. Press the button Convert to gif. To create a gif from the video.

Pros:

• Ability to create a GIF from the photo and video.
• You can apply a watermark over the gifs.
• There are compression and GIF cutting functions to the desired size.
• The ability to impose text and visual effects.
• Free service.
• No need to install the program to the computer.

Minuses:

• Interface in English.
• Uncomfortable, in my opinion, interface.
• You can work with the service only if you have an internet connection.

Imgflip - Online service for creating gifs from photos and videos. Work algorithm:

1. Select a photo or video from which you want to create a gif.

2. You need to specify the path to the file on the computer using the button Upload Video. Or insert a link to the left screen field if the video is posted on the Internet.

3. When the file is loaded, the settings will appear on the right side of the screen in which you can specify the screen size, add text, turn video.

4. Press the button Generate Gif. To create a gif.

5. Press the button Download.gif. To save the finished file to the computer.

Pros:

• Simple, intuitive interface.
• There is a free version.
• Ability to trim and rotate GIF.
• You can add a logo on the GIF even in the free version.
• No need to download and install a program on a PC.

Minuses:

• Little capabilities for the free version - you can add only one inscription and one image in GIF, there are limitations in size and number of frames.
• You can only work with the Internet.
• The free version creates a GIF with a watermark imgflip.com. .